 |
This tutorial shows how to set up a USB-over-IP server with OpenSUSE 11.2 as well as a USB-over-IP client (also running OpenSUSE 11.2). The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates "USB I/O messages" into TCP/IP payloads and transmits them between computers. USB-over-IP can be useful for virtual machines, for example, that don't have access to the host system's hardware - USB-over-IP allows virtual machines to use remote USB devices. http://www.howtoforge.com/how-to-set-up-a-usb-over-ip-server-and-client-with-opensuse-11.2 |
|
This tutorial shows how to do data striping across four single storage servers (running Ubuntu 9.10) with GlusterFS. The client system (Ubuntu 9.10 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA. http://www.howtoforge.com/striping-across-four-storage-nodes-with-glusterfs-on-ubuntu-9.10 |
|
FreeNX is an open source implementation of NoMachine's NX Server. It is a bit more akin to Microsoft's RDP protocol than the usual VNC, so while keeping bandwidth to a minimum, it maintains good visual quality and responsiveness. http://www.howtoforge.com/how-to-set-up-a-terminal-server-in-linux-using-ubuntu-9.10-and-freenx |
|
module-assistant is a tool for building Debian kernel modules from source, without having to rebuild the whole kernel. It fetches module-source packages that have been prepared for the Debian distribution via apt and produces .deb packages. This tutorial shows how to use module-assistant in command-line mode and in interactive mode. http://www.howtoforge.com/building-kernel-modules-with-module-assistant-on-debian-lenny |
|
This tutorial shows how to set up a USB-over-IP server with Debian Lenny as well as a USB-over-IP client (also running Debian Lenny). The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates "USB I/O messages" into TCP/IP payloads and transmits them between computers. USB-over-IP can be useful for virtual machines, for example, that don't have access to the host system's hardware - USB-over-IP allows virtual machines to use remote USB devices. http://www.howtoforge.com/how-to-set-up-a-usb-over-ip-server-and-client-with-debian-lenny |
|
This article explains how you can set up an SSL vhost under Apache2 on Ubuntu 9.10 and Debian Lenny so that you can access the vhost over HTTPS (port 443). SSL is short for Secure Sockets Layer and is a cryptographic protocol that provides security for communications over networks by encrypting segments of network connections at the transport layer end-to-end. We use the mod_ssl Apache module here to provide strong cryptography for Apache2 via SSL by the help of the Open Source SSL toolkit OpenSSL. http://www.howtoforge.com/how-to-set-up-an-ssl-vhost-under-apache2-on-ubuntu-9.10-debian-lenny |
|
This tutorial shows how to combine four single storage servers (running Ubuntu 9.10) to a distributed replicated storage with GlusterFS. Nodes 1 and 2 (replication1) as well as 3 and 4 (replication2) will mirror each other, and replication1 and replication2 will be combined to one larger storage server (distribution). Basically, this is RAID10 over network. If you lose one server from replication1 and one from replication2, the distributed volume continues to work. The client system (Ubuntu 9.10 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA. http://www.howtoforge.com/distributed-replicated-storage-across-four-storage-nodes-with-glusterfs-on-ubuntu-9.10 |
 |
LAMP is short for Linux, Apache, MySQL, PHP. This tutorial shows how you can install an Apache2 webserver on a Fedora 12 server with PHP5 support (mod_php) and MySQL support. http://www.howtoforge.com/installing-apache2-with-php5-and-mysql-support-on-fedora-12-lamp |
|
This tutorial shows how to combine four single storage servers (running Ubuntu 9.10) to one large storage server (distributed storage) with GlusterFS. The client system (Ubuntu 9.10 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA. http://www.howtoforge.com/distributed-storage-across-four-storage-nodes-with-glusterfs-on-ubuntu-9.10 |
|
This tutorial describes how to set up database replication in MySQL. MySQL replication allows you to have an exact copy of a database from a master server on another server (slave), and all updates to the database on the master server are immediately replicated to the database on the slave server so that both databases are in sync. This is not a backup policy because an accidentally issued DELETE command will also be carried out on the slave; but replication can help protect against hardware failures. http://www.howtoforge.com/how-to-set-up-database-replication-in-mysql-on-ubuntu-9.10 |
Detalii >>
comentarii: 0
